Best Overland Chimney & Dryer Vent Services

Overland Chimney & Dryer Vent Services delivers lifetime-warranted chimney and dryer vent installations to homeowners across Overland Park and Johnson County. Response in 2 to 3 hours. Every installation backed by a lifetime workmanship warranty.

Our Services

Stainless Steel Chimney Liner Installation

Stainless steel chimney liner installation is one of the highest-value investments a homeowner with an aging or damaged flue system can make — and its long-term performance depends critically on the grade of stainless steel specified, the quality of the installation methodology, and the correctness of the sizing for the connected appliance. At Overland Chimney & Dryer Vent Services, our stainless steel liner installations begin with a full assessment of the chimney's interior dimensions, the appliance being connected and its fuel type, the flue gas temperature range expected in operation, and any offset or bends in the flue pathway that affect liner routing. These factors together determine the correct liner grade — 316L for gas applications with their cooler, more condensate-producing flue gases, and 904L for wood or coal applications with higher temperatures and more corrosive combustion byproducts. We install flexible liner systems for chimneys with offsets or bends that would prevent rigid liner installation, and rigid liner systems for straight flue runs where the superior thermal performance and reduced creosote adhesion of rigid stainless justify the more involved installation process. All joints are sealed with the manufacturer-specified high-temperature sealant, all connections at the appliance end and the termination point are correctly fitted and secured, and the system is tested for draft performance before commissioning. Our lifetime workmanship warranty covers the installation in full. (913) 600-1862.

Chimney Crown Rebuild

A chimney crown rebuild is the appropriate intervention when a chimney crown has deteriorated beyond the point where sealing or surface repair can produce a reliable, lasting result. This commonly occurs when the original crown was incorrectly constructed — too thin, with insufficient overhang, without proper slope, or using unsuitable mortar or concrete — or when accumulated freeze-thaw damage over many seasons has produced pervasive cracking throughout the crown's structure. In Overland Park, chimney crown deterioration is accelerated by the region's wide temperature range and the significant freeze-thaw cycling that Johnson County winters produce. A crown that was marginal in construction can fail quickly under these conditions — producing cracks that allow each subsequent season's moisture to work further into the chimney structure. Rebuilding to the correct specification, rather than repeatedly patching a flawed original, is often the most economical long-term solution. Our chimney crown rebuild involves complete removal of the existing crown, assessment of the chimney's top course for any damage that the failed crown allowed, and rebuilding to the correct specification: appropriate thickness for structural integrity, minimum 2-inch overhang beyond the chimney face to shed water clear of the masonry, correct inward slope toward the flue opening, and crown sealant applied to the completed surface for additional weatherproofing. The rebuild uses materials appropriate for the Kansas climate's thermal demands — not generic concrete that will crack in the first severe freeze-thaw cycle. Our lifetime workmanship warranty covers the rebuilt crown. Response in 2 to 3 hours. (913) 600-1862.

Full Dryer Vent System Installation

A complete dryer vent system installation — from the appliance connection at the dryer to the correctly positioned and specified exterior termination — is a project that, done correctly, produces a safe, efficient, code-compliant venting system that requires only routine cleaning to maintain over its lifetime. Done incorrectly, it produces a system that accumulates lint faster, restricts airflow sooner, and creates fire risk that routine cleaning alone can't fully address. Our full dryer vent system installation designs each system around the specific constraints of the property — the dryer's location, the optimal path to an exterior wall, the total duct length achievable within code-compliant equivalent lengths, and the correct termination location that keeps the exhaust clear of windows, doors, and HVAC equipment. We use rigid aluminium duct throughout, properly sized at 4 inches diameter to match current code requirements for residential dryer vent applications, with all joints sealed using foil tape rather than screw-type fittings that create internal surfaces for lint accumulation. The termination is fitted with a correct louvered or damper-type vent cover that allows free exhaust airflow while preventing backdraft and animal entry, positioned at least 3 feet from any building opening and at least 12 inches above grade. The completed installation is flow-tested before we leave to confirm that the system is performing to specification. Our lifetime workmanship warranty covers the full installation. 2 to 3 hour response. (913) 600-1862.